Home BLOG Tint your Car Windows on your own

Tint your Car Windows on your own

Can you tint your car windows myself? Autokartz tells you how to tint your Car Windows – in 5 Cool Steps!

Window tinting your car can charge a small wealth, but it adds such a nice touch to your ride. So is there a low-cost alternative for getting your windows tinted?
You can effortlessly do it physically with little cost and little labour.
Car-window tinting will keep you chiller in the summertime, shield your car’s interior, and add worth when you’re ready to trade it. With some merchants charging up to ₹1000 just for labour, a DIY car tint will keep that cash in your pocket.

What will you need?
You can catch the window-tint film at sites like tradekartz.com. You’ll also want a window-tint-film application solution, a lint-free cleaning cloth, a razor knife, a scraper blade, an application squeegee, and a heat gun. Find a dust-free room to work in (such as a garage) and evade doing the job in extreme heat or cold or on a day with extraordinary moisture. And most significant, check Government’s laws online to find out which windows can lawfully be tinted and how dark you can make them.

Benefits of Tinting your Car Windows
Before we list you the 5 quick steps we wanted to cover the paybacks of window tinting.
• Window tint will not allow 70% to 90% of harmful UVA and UVB rays.
• Window tint can decrease the interior heat by 35% to 55%.
• It safeguards the interior dash and upholstery from fading.
• Reduces glare & increases privacy.
• Additional protection by keeping up shattered glass in place.

5 steps to tint your ride
#1 Preparation
Spread over the application solution to the inside of the window. Don’t over-spray onto the gate trims.
Course the scraper blade crossways on the window from side to side, beginning from the top and gently working your way down the window. This will eliminate any dust, grime and debris. Be attentive not to scratch the glass with the blade.
Run the squeegee diagonally on the window from side to side, starting from the top and working down the window to remove any leftover debris and solution.
Note: Measure Two times Cut One time
Beforehand you purchase your tint use measuring tape to measure the surfaces that you will be tinting. You must make sure that you buy the right quantity. When you purchase window tint or film it is going to come in a roll. The rolls come in a variety of sizes and lengths. And purchase a little extra if you can just in case.

#2 Cut
Now you can cut the tint into the proportions that you measured for each separate window. But before you cut your film to place on the window you must be certain that there are at least 2 inches around each end of the window. There are “pre-cut” films based on the car company. You can cut the left-over off as you fix the window tint.

#3 Install
Next, you shall spray the application solution onto the glass and take away the adhesive backing of the film. Be certain that the sticky part is facing the window. Make sure you don’t place the whole film on the window. This can cause bubbling. Start at the bottom of the window, attach the sticky portion and smooth it out as you move skywards. Cut off the spare edges with the razor.

#4 Smooth it Out
Take your hand squeegee and smoothen out any bubbles and/or creases. Use a hard plastic squeegee to level out the film to move the air bubbles towards the edges. If you want to make the film more flexible then use a heat gun. The heat gun is not essential but will make the tint look flatter. If you choose to use a heat gun apply it to the external side so you don’t melt the film.
Use your spray bottle full of hot water to spray on the glass to make it stress-free for your squeegee to smooth it out. Cut off any extra film tint and smear away any excess water with a towel.

Extra Tips
The window tint you bought must have scrubbing instructions on how to clean your windows, but as a general rule of thumb don’t use any severe window cleaners as it could fade your tint Also, abstain from rolling your windows up or down for at least 3 days. For the cost of limited basic tools and resources, a DIY car tint is an advisable project. You’ll save quite of money and have an improved insulated car.

Must Read

Jaguar I-Pace Recalled Over An Issue With Its High-Tech Brakes | Carscoops

Jaguar is conducting a global recall of the I-Pace that...

Toyota to join new hypercar endurance racing class, produce road-going version | CarAdvice

The Japanese automaker has confirmed it will compete in the class replacing the current top-tier LMP1 category. Toyota has used the pre-race press conference at...

Rolls-Royce Wraith Black Badge: A close look

15th Jun 2019 8:00 am We get acquainted with the dark side of Rolls-Royce. I’m at the Yas Marina circuit behind the wheel of a 632hp...

Turbo 101: How the Turbo Boosts Your Engine

The word turbo is used as a synonym for speed and power and is used as an adjective to describe anything that...

Hard-to-believe tricks for your car comfort that you should definitely try out!

Your loyal ride has taken you on a lot of trips, now it’s time to have a look on these smart hacks that...